Home > Products > Compare
COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same time.
Medium Wheel Loaders
966
ADD MODEL
ADD MODEL
Engine Power @ 1,600 rpm - ISO 14396:2002
321 HP
Na
Na
Gross Power @ 1,600 rpm - SAE J1995:2014
325 HP
Na
Na
Engine Model
Cat C9.3B
Na
Na
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
303 HP
Na
Na
Note (1)
For a machine configuration as defined under Weight.
Na
Na
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Na
Na
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1255 ft-lb
Na
Na
Engine Torque @ 1,200 rpm – ISO 14396:2002
1313 lb/ft
Na
Na
Gross Torque @ 1,200 rpm – SAE J1995:2014
1327 lb/ft
Na
Na
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Na
Na
Displacement
9.3 L
Na
Na
Operating Weight
51124 lb
Na
Na
Note
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Na
Na
Forward - 1
4.2 mile/h
Na
Na
Forward - 2
8.4 mile/h
Na
Na
Forward - 3
15 mile/h
Na
Na
Forward - 4
24.5 mile/h
Na
Na
Reverse - 1
4.5 mile/h
Na
Na
Reverse - 2
9.2 mile/h
Na
Na
Reverse - 3
16.5 mile/h
Na
Na
Reverse - 4
24.5 mile/h
Na
Na
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
108
Na
Na
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
69 dB(A)
Na
Na
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
109 dB(A)
Na
Na
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
76
Na
Na
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)
Na
Na
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Na
Na
Breakout Force
38999 lb
Na
Na
Static Tipping Load - Full 40° Turn - No Tire Deflection
15981 kg
Na
Na
Static Tipping Load - Full 40° Turn - With Tire Deflection
32727 lb
Na
Na
Cooling System
17.4 gal (US)
Na
Na
Crankcase
6.1 gal (US)
Na
Na
DEF Tank
6.9 gal (US)
Na
Na
Differential - Final Drives - Front
15.1 gal (US)
Na
Na
Differential - Final Drives - Rear
15.1 gal (US)
Na
Na
Fuel Tank
80.1 gal (US)
Na
Na
Hydraulic Tank
30.1 gal (US)
Na
Na
Transmission
15.5 gal (US)
Na
Na
Implement System - Maximum Operating Pressure
4496 psi
Na
Na
Implement System - Maximum Pump Output at 2,250 rpm
99 gal/min
Na
Na
Hydraulic Cycle Time - Total
10.1 seconds
Na
Na
Centerline of Rear Axle to Edge of Counterweight
7.7 ft
Na
Na
Centerline of Rear Axle to Hitch
5.1 ft
Na
Na
Ground Clearance
424 mm
Na
Na
Height - Top of Exhaust Pipe
3531 mm
Na
Na
Height - Top of Hood
2850 mm
Na
Na
Height - Top of ROPS
3593 mm
Na
Na
Hinge Pin Height at Carry
2 ft
Na
Na
Hinge Pin Height at Maximum Lift
4245 mm
Na
Na
Lift Arm Clearance at Maximum Lift
3687 mm
Na
Na
Overall Length - Without Bucket
7399 mm
Na
Na
Tread Width
7.3 ft
Na
Na
Wheel Base
3550 mm
Na
Na
Rack Back - Carry Height
50 degrees
Na
Na
Rack Back - Maximum Lift
62 degrees
Na
Na
Bucket Range
2.8-11.9 m³ 3.75-15.5 yd³
Na
Na
Width over Tires (Loaded)
9.11 ft
Na
Na
Rack Back at Ground
37 degrees
Na
Na