Jallad | Products

Maximum Gross Power

74.7 HP

Engine Model

Cat C2.8*

Maximum Engine Speed

2550 rpm

Maximum Gross Power - Rated Engine Speed

2400 r/min

Maximum Gross Power - SAE J1995

74.7 HP

Maximum Gross Power - ISO 14396

74.3 HP

Maximum Gross Power - ISO 14396 (metric)

75.3 mhp

Rated Net Power - Rated Engine Speed

2400 r/min

Rated Net Power - SAE J1349

72.7 HP

Rated Net Power - ISO 9249

72.1 HP

Rated Net Power - 2,400 rpm - ISO 9249 (metric)

73.1 mhp

Maximum Gross Torque - SAE J1995

222 lb/ft

Maximum Gross Torque - ISO 14396

221 lb/ft

Maximum Net Torque - SAE J1349

218 lb/ft

Maximum Net Torque - ISO 9249

217 lb/ft

Displacement

171 in³

Bore

3.54 in

Stroke

4.33 in

Note

* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Note (1)

*Vary with bucket

Note (2)

**Vary with tire

Note (3)

^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.

Operating Weight

14617 lb

Bucket Capacities

0.75-1.55 m³ (1.0-2.0 yd³)

Bucket Capacities - General Purpose

0.80-1.35 m³ (1.0-1.7 yd³)

Multi-Purpose

0.75-1.1 m³ (1.0-1.4 yd³)

Bucket Capacities - Light Material

1.25-1.55 m³ (1.6-2.0 yd³)

Fuel Tank

24 Gal

Cooling System

3.2 Gal

Engine Crankcase

2.3 Gal

Axles - Front Center Differential

2.3 Gal

Axles - Rear Center Differential

2.3 Gal

Hydraulic System - Including Tank

18.6 Gal

Hydraulic Tank

11.8 Gal

Transmission

0.6 Gal

Front

Fixed (standard), Locking Differential (optional)

Rear

Fixed (standard), Locking Differential (optional)

Steering Articulation Angle - Each Direction

39 °

Maximum Flow - Steering Pump

12.3 gal/min

Maximum Working Pressure - Steering Pump

3336 psi

Steering Cycle Times – (full left to full right) – at High Idle

2.8 s

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.25 turns or 4.00 turns

Forward and Reverse - Speed Range Creep#

6 mile/h

Forward and Reverse - Speed Range 1*

6 mile/h

Forward and Reverse - Speed Range 2** - High Speed

10.5 mile/h

Forward and Reverse - Speed Range 2** - Standard

12 mile/h

Forward and Reverse - Speed Range 3***

25 mile/h

Tire Size - Standard

*405/70 R20 SPT9

Tire Size - Optional

405/70 R20 Powerloads

Tire Size - Optional (1)

400/70 R20 XMCL/Bibload

Tire Size - Optional (2)

360/80 R20 TRI 2

Tire Size - Optional (3)

40X14-20 TL, SM/TR

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Main Relief - 1st Auxiliary (3rd slice)

3408 psi

Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*

24 gal/min

Main Relief - 1st Auxiliary (3rd slice) - High Flow*

33 gal/min

Main Relief - 2nd Auxiliary (4th slice)

3408 psi

Main Relief - 2nd Auxiliary (4th slice) - Flow

12 gal/min

Hydraulic Cycle Time - Rackback

2.5 s

Hydraulic Cycle Time - Lift

5.8 s

Hydraulic Cycle Time - Dump

1.8 s

Hydraulic Cycle Time - Float Down

3.6 s

Height: Ground to Cab**

8.75 ft

Height: Ground to Beacon**

9.33 ft

Height: Ground Axle Center**

1.67 ft

Height: Ground Clearance**

1 ft

Length: Overall*

20.17 ft

Length: Rear Axle to Bumper

4.5 ft

Length: Hitch to Front Axle

3.5 ft

Length: Wheel Base

7.08 ft

Clearance: Bucket at 45° *

10.42 ft

Clearance: Load over Height**

10.75 ft

Clearance: Level Bucket**

12.08 ft

Height: Bucket Pin**

12.75 ft

Height: Overall**

15.92 ft

Reach: Bucket at 45° *

3.42 ft

Carry Height: Bucket Pin

1.25 ft

Dig Depth**

0.42 ft

Width: Bucket

6.75 ft

Width: Tread Center

5.08 ft

Turning Radius: Over Bucket

16.17 ft

Width: Over Tires

6.67 ft

Turning Radius: Outside of Tires

13.17 ft

Turning Radius: Inside of Tires

6.50 ft

Rack Angle at Full Lift

66°

Dump Angle at Full Lift

40°

Rack Angle at Carry

42°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

15070 lb

Tipping Load - Straight - ISO 14397-1 †

8385 lb

Tipping Load - Full Turn - ISO 14397-1 †

6943 lb

Operating Weight: Carriage and Tines ^^

14714 lb

Tipping Load - Straight †

8385 lb

80% of Tip: Firm and Level EN474-3 ††

4375 lb

Note (4)

^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).

Note (9)

Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Length: Front Axle to Front of Coupler

4.75 ft

Height - Ground to Cab

8.75 ft

Height - Ground Clearance

1 ft

Length - Overall with Bucket

18.67 ft

Length - Wheel Base

7.08 ft

Clearance - Bucket at 45°

8.25 ft

Clearance - Level Bucket

10.50 ft

Height - Bucket Pin

11.17 ft

Reach - Bucket at 45°

2.67 ft

Dig Depth

0.45 ft

Width - Bucket

6.75 ft

Width - Tread Center

5.08 ft

Turning Radius - Over Bucket

15.08 ft

Width - Over Tires

6.67 ft

Turning Radius - Inside Tire

6.67 ft

Tipping Load – Straight – ISO 14397-1 †

9581 lb

Tipping Load – Full Turn – ISO 14397-1 †

8141 lb

Tipping Load - Full Turn - ISO 14397-1†

6800 lb

Recyclability

93%

Engine

Weights

Buckets

Service Refill Capacities

Axles

Steering

Transmission

Tires

Cab

Loader Hydraulic System

Dimensions - With HPL-V Coupler - Approximate#

Dimensions - With SSL Coupler - Approximate

Sustainability